Planar CM17.4SXAD Manuel d'utilisateur télécharger pdf (Page 22)

10 | Installing the Display

VS17.4SXAD / CM17.4SXAD

(

020-0168-00B

)

Power Management System

The VitalScreen CSR and VitalScreen CR displays comply with the

VESA Display Power Management Signaling (DPMS) standard. This

standard provides four power-saving modes, based on the display

detecting the horizontal or vertical sync signals. This table describes

the four modes.

Mode AC Input Power

LED Status

On 60 watts maximum Steady green

Standby 5 watts maximum Blinking green

Suspend 5 watts maximum Blinking green

Off 5 watts maximum Off

Including AC adapter

When the display is in power-saving mode or detects incorrect timing,

the screen is blank and the power LED indicator blinks.

Landscape-to-Portrait Mechanical Conversion

The 17.4" display (deskstand version) has a unique feature that allows

a mechanical conversion of the display from the traditional landscape

mode to a vertical portrait mode.

Use both hands whenever you are changing the orientation of

the display.

1 Gently pull the lower half of the display toward you.

You must tilt the display upward before rotating it.

Rotate the display 90 degrees to left (counterclockwise) until it stops

in portrait mode.

3 Select, if necessary and/or available, the different option on the video

card, or display settings on the control panel.

4 Refer to www.portrait.com

for software that allows conversion from

landscape to portrait mode.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Pas de commentaire

Planar CM17.4SXAD Manuel d'utilisateur Page 22